Sistem Audio Profesional Solton CXa-2 Hornloaded Sistem 4600W

A powerfull active system!
Cod Produs: CXa-2.
Categorii: , .

Sistem Audio Profesional Solton CXa-2 Hornloaded Sistem 4600W

36.000,00 lei TVA inclus

 

Sistem audio profesional SOLTON CXa-2 4600W / 9200W

HORN LOADED COAXIAL CX 15 HI + = 2 bucati.
Loudspeaker Type
15",Two-way, Horn loaded coaxial, weather protected
Frequency Range (-10dB)
50 Hz – 20 kHz
Frequency Response (+- 3dB)
60 Hz – 18 kHz
Coverage Pattern
H 90° x V 40° nominal
Power Handling
700 W continuous, 2800 W peak
System Sensitivity (1w/1m)
104 dB
Maximum SPL (Calculated at 1m)
132 dB continuous, 138 dB peak
HF Driver 2,5 VC, 1,4" exit compression driver
LF Draiver 15", 4" voice coil, weather protected speaker
Nominal Impedance 8 ohms
Crossover 1,7 kHz
PTC driver protection
Active Tuning / Features
Enclosure 15 mm birch plywood
Finish 2x Black Poly Urea weather resistant coating
Fittings 2x handles, ANCRA rigging
Protective Grille Black perforated steel with acoustic transparent foam backing
Connectors 2 x NL4, Pins 1+/1-
Dimensions mm (WxHxD) 550 x 550 x 550
Weight 43 kg

SUBWOOFER HD 181 SUB = 4 bucati
Loudspeaker Single18", bass-reflex, subwoofer
Frequency Range (-10dB)
33 Hz – 250 Hz
Frequency Response (+- 3dB)
38 Hz – 140 Hz
Power 800 W continuous, 3200 W peak
System Sensitivity (1w/1m)
100 dB
Maximum SPL (Calculated at 1m)
129 dB continuous, 135 dB peak
LF Driver 18", 4" voice coil speaker
Nominal Impedance 8 ohms
Crossover active by DSP
Enclosure 15 mm birch plywood
Finish Black textured paint
Fittings 2x Handles, M20 pole socket
Protective Grille
Protective Grille black perforated steel with acoustic transparent foam backing
Connectors 2x NL4, Pins 1+/1-
Dimensions mm (WxHxD) 600 x 660 x 640
Weight 43 k

POWER AMPLIFIER DX4 = 1 bucata
Type
4 Channel Amplifier
Output Power 8 ohms per channel (watt) 1300 W
Output Power 4 ohms per channel (watt) 2200 W
Output Power 2 ohms per channel (watt) 2600 W
Output Power 8 ohms bridged (watt) 2x 4200 W
Output Power 4 ohms bridged (watt) 2x 5000 W
THD 0,05 % (1 kHz, 8 ohms)
Frequency Response 20 Hz, 34 kHz +0 /-1 dB
Damping Factor > 1000 (8 ohms, 1 kHz)
S/N Ratio 112 dB
Input Impedance balanced 20 k ohms (10 k ohms)
Input Connectors 3-pin XLR, electronically balanced
Output Connectors Speakon
Channel separation at 1 kHz > 70 dB
Protection Circuit
ACL, IGM, PFC, Auto Ramp, short circuit, DC Voltage, turn on/off transient, current inrush, sub/ultrasonic input
Voltage Gain (dB)
23, 26, 29, 32, 35, 38, 41, 44 dB selectable
Controls Front main switch, volume control (4 channels)
Controls Rear parallel / stereo, gain, voltage clip limiter, mode switch, bridge
Class TD
Power Supply 150-260 V 50/60 Hz
Dimensions mm (WxHxD) 483 x 88 (2U) x 396
Weight 13 Kg

PROCESOR DSP 206 = 1 bucata.
Connection WIFI control via USB or TCP/IP LAN(Ethernet)
Sampling Rate 48 kHz / 48 bit DSP48 kHz / 48 bit DSP
Dynamic Range > 110 dB
Maximun Input Level +20 dBu
Maximun Output Level +20 dBu
Operational Frequency Range 20 Hz - 20 kHz (-0.5 dB)
Display 20 character blue crystal
Memory 30 presets on hardware unit
Filters Butterworth, Bessel, Linkwitz-Riley, HS & LS
Octave Range 12,18, 24 and 48 db /Octave
Equalizer 8 band fully parametric (frequency, Q and gain) on each output and input
Delay Input 29,383 Meter / 85,311 MS
Delay Output 36,272 Meter / 105,311 MS
Each Output 180 phase inverter and mute button, limiter available for safety
Input Impedance Balance 20 K Ohm
Output Impedance Unbalance 100 Ohm
PC Interface USB A / RS 485 / Ethernet Interface
KCMR >70 dB (1 kHz)
Signal / Noise Ratio >110 dB
Distortion 0.1% Output = 0dBu / 1kHz
Software Windows
Audio input connectors 2 x XLR female
Audio output connectors 6 x XLR male
Power Supply 220V AC 50Hz ± 10%
Dimensions mm (WxHxD) 483 x 44 (1U) x 254
Weight 2.7 k

Recenzii

Nu există încă recenzii.

Add a review